●INSTRUCTION: 1.Put the socket into 1” squares head of the tool and the handle on the other end. 2.Put the socket into the nut when it is disassembled or firmed, pay attention to the direction of looseness and tightness. Rock the shock shank, and the handle be closer to the bolt side. 3.When the nuts are loosened, change to the ordinary extension bar to remove quickly. After tightening nuts, use the extension bar to quickly screw in nuts, and then change to the labor-saving device for final tightening. 4.The normal disassembled(fastened) the nut needed maximum output torque 1200N.M(to be equal use 40 kilograms strength on 3 meter thrust augmentation poles)the rocking bar to pull the strength is 18 kilograms strength.
